Get a Backup Camera
System
and Drive Safe
Reverse aid cameras
ensure that you never have any accidents while maneuvering
your truck, RV, or camper in a tight spot. A
backup camera system
can be easily installed in your vehicle.
Reverse camera systems
from CCTV Headquarters fit in every make of vehicle. We
carry reverse camera
systems and accessories. For safety, consider our
RV backup cameras.
RV backup cameras
ensure you are able to see your RV’s perimeter so you
can back up safely.
Quality
Reverse Camera Systems
An
automotive camera is an essential accessory for all
large vehicle owners. RV
backup cameras from CCTV Headquarters are available
by calling, faxing, or placing an online order using our
secure shopping cart system. We have a wide selection of
reverse aid cameras,
cables and
extra monitors.
An Automotive Camera
Keeps You Moving
See what is happening around you as you
drive. A backup camera
system
is the perfect choice to see your perimeter or to help you
while backing up. Reverse
aid cameras provide a great way to stay aware in any
direction.
|
|
Obserview System package:
BS-70074D B/W |
Obserview System package:
CS-70074D COLOR |
|
|
 |
|
Model NO. |
CC-47-D (or L) Camera |
|
Pick-up Device |
1/3" image sensor interline
transfer CCD |
|
Image Size |
4.82 x 3.64mm |
|
Elements |
NTSC:510(H) x 492(V) PAL:
500(H) x 582(V) |
|
Horizontal Resolution |
More than 380 TV lines |
|
Shutter Control |
NTSC: 1/60~1/100,000sec.
PAL: 1/50~1/100,000sec. |
|
Scanning System |
2:1 interlace |
|
Synchronization |
Internal |
| S/N
Ratio |
More than 48db (AGC OFF) |
|
Gain Control |
AUTO |
|
Sensitivity |
o lux/F1.2 By IR LED |
|
Video Output |
Composite 1.0 Vp-p/75 Ohm |
|
White Balance |
AUTO |
|
Power Consumption |
3w (Max) |
|
Dimension |
104.6mm(D) x 62mm(W) x 62mm
(H) |
|
Weight (per unit) |
650g |
|
Scanning Frequesncy |
H: NTSC: 15.750 KHz /PAL:
15.625KHz |
| |
V: NTSC: 60Hz / PAL: 50Hz |
| DC
Power Source |
DC9~12V |
|
Lens Mount |
Board lens 2.5mm/F2.5 |
|
Lens View Angle |
115.5 degree |
| IR
LED Type |
850nm/Auto control by CDS |
|
Lens View Angle |
115.5 degree |
| IR
LED ON |
Under 35~50 lux |
| IR
LED Project Distance |
5 Meters MAX |
|
Operation Temp. |
-10 to 50 C (14 to 122 F) |
|
Storage Temperature |
-30 to 60 C (-4 to 158 F) |
|
SPECIFICATIONS
|
Model NO. |
CM-700 |
|
Display |
7" active matrix TFT-LCD
(16:9) |
|
Back Light |
Built-in CCFL |
| Dot
Format |
1440(H) x 234(V) |
| Dot
Pitch |
0.108mm(H)x0.375mm(V) |
|
Brightness |
300 cd/m2 (Nit) |
|
Viewing angles |
65/65/40/65 degrees
(L/R/T/B) |
|
Pixel configuration |
Stripe |
|
Power requirements |
12 VDC for monitor |
| |
13-24 VDC for control box |
|
Video signal |
1V p-p (positive) 75 ohms. |
|
Video system |
NTSC/PAL Auto Detection |
|
Operating temperature |
0~50 C |
|
FEATURES
(for TFT-LCD Monitor)
- OSD (On Screen Dsiplay) control for:
Color, Tint, Brightness, Contrast and
Mirror (for Camera Mirror/Front View
switch)
- Wireless IR Remote Control
- NTSC/PAL Signal Auto Detection
- Audio Speaker is included
FEATURES (for Control Box)
- 2 Camera inputs, CCD 1 is default
CCD 2 for Reverse Operation.
- 2 Audio/Video Output for recorder
- Auto switch from default CCD 1 input
to CCD 2 input source to check view
behind the car (AUTOMATIC MIRROR VIEW IN
MONITOR) while driver set the gear to
Reverse.
- Monitor auto power on while Reverse
Gear Signal detected
|
|
ACCESSORIES
FOR THIS SYSTEM ARE AVAILABLE BY CLICKING HERE
|
|
|
|
|
|
You are visitor: 
|
